{"title":"DroneCAN Nodes","description":null,"products":[{"product_id":"magnode-dronecan-magnetometer","title":"MagNODE DroneCAN Magnetometer","description":"\u003ch3\u003eA clean heading, wherever you mount it.\u003c\/h3\u003e\n\u003cp\u003eMotors, ESCs and high-current wiring are the enemy of a good compass. The MagNODE puts a PNI RM3100 magneto-inductive magnetometer in a sealed, potted aluminum housing on DroneCAN, so you can mount it where the magnetic field is quiet, out on a boom or a wing, and run a single rugged cable to it. Two CAN connectors let it sit anywhere in a daisy-chained bus, and the X, Y and Z axes are marked right on the label so the orientation is set correctly the first time.\u003c\/p\u003e\n\u003ch4\u003eKey features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePNI RM3100 3-axis magneto-inductive magnetometer: high resolution and low noise\u003c\/li\u003e\n\u003cli\u003eDroneCAN interface for ArduPilot and PX4 autopilots\u003c\/li\u003e\n\u003cli\u003eTwo sealed TE DEUTSCH UAV-series 6-way circular connectors (CAN 1 \/ CAN 2) for daisy-chaining on the bus\u003c\/li\u003e\n\u003cli\u003eSensor axes (X forward, Y right, Z down) marked on the top label\u003c\/li\u003e\n\u003cli\u003eFully potted, sealed, green anodized aluminum housing with four mounting ears; engineered to DO-160G and MIL-STD-810H environmental standards; −10 °C to +55 °C operating\u003c\/li\u003e\n\u003cli\u003eMade in our FAA-approved manufacturing facility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTypical uses:\u003c\/strong\u003e remote compass mounting on booms, masts and wings · moving the compass away from GPS-integrated units with interference · redundant heading sources on larger airframes\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor\u003c\/td\u003e\n\u003ctd\u003ePNI RM3100 3-axis magnetometer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003eDroneCAN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCAN connectors\u003c\/td\u003e\n\u003ctd\u003e2 × TE DEUTSCH YUAV002-06PN-HE000, 6-way pin receptacles, 2-hole flange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxis marking\u003c\/td\u003e\n\u003ctd\u003eX forward (away from connectors), Y right, Z down\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental\u003c\/td\u003e\n\u003ctd\u003eEngineered to DO-160G and MIL-STD-810H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e−10 °C to +55 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing\u003c\/td\u003e\n\u003ctd\u003eGreen anodized aluminum, fully potted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e47.6 × 41.3 × 19.1 mm case; 60.3 mm wide including ears; connectors add 10.3 mm at the rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003e4 × Ø3.4 mm holes, 54.0 × 25.4 mm pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eMN01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eAbout Node\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt like avionics, because that's what we build.\u003c\/strong\u003e Node is an avionics manufacturer holding FAA Parts Manufacturer Approval (PMA), and we've built avionics for general aviation and OEM customers for 35 years. For more than a decade we've also flown large unmanned systems: multicopters, VTOLs, helicopters and fixed-wing aircraft. Every Node Electronics part is made in our FAA-approved manufacturing facility, housed in anodized aluminum and engineered to DO-160G and MIL-STD-810H environmental standards, the same standards certifiable UAS autopilots are built to. It's the hardware the unmanned and optionally piloted industry needs when \"good enough for a hobby build\" isn't.\u003c\/p\u003e","brand":"Node Electronics","offers":[{"title":"Default Title","offer_id":67863786651700,"sku":null,"price":1145.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/3565\/8548\/files\/MagNODE_02_rear_right.png?v=1793315721"},{"product_id":"adnode-dronecan-air-data-module","title":"adNODE DroneCAN Air Data Module","description":"\u003ch3\u003eAirspeed and altitude, sealed in aluminum.\u003c\/h3\u003e\n\u003cp\u003eThe adNODE is a DroneCAN air data module that measures differential pressure for airspeed and static pressure for barometric altitude. Your pitot and static lines connect to two labelled, knurled compression fittings on the front of the unit; two sealed CAN connectors on the back put it on the bus. Everything is potted in an anodized aluminum housing, so it holds up to the vibration, moisture and temperature swings of real flight operations.\u003c\/p\u003e\n\u003ch4\u003eKey features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAirspeed (differential pressure) and barometric altitude (static pressure) in one node\u003c\/li\u003e\n\u003cli\u003eLabelled PITOT and STATIC ports: knurled M5 compression fittings for 6 mm OD \/ 4 mm ID tubing\u003c\/li\u003e\n\u003cli\u003eDroneCAN interface for ArduPilot and PX4 autopilots\u003c\/li\u003e\n\u003cli\u003eTwo sealed TE DEUTSCH UAV-series 6-way circular connectors (CAN 1 \/ CAN 2) for daisy-chaining on the bus\u003c\/li\u003e\n\u003cli\u003eFully potted, sealed, green anodized aluminum housing with four mounting ears; engineered to DO-160G and MIL-STD-810H environmental standards; −10 °C to +55 °C operating\u003c\/li\u003e\n\u003cli\u003eMade in our FAA-approved manufacturing facility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTypical uses:\u003c\/strong\u003e fixed-wing and VTOL airspeed sensing · pitot-static systems on larger UAS · replacing exposed hobby-grade airspeed boards\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasurements\u003c\/td\u003e\n\u003ctd\u003eDifferential (airspeed) and static (barometric) pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003eDroneCAN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure ports\u003c\/td\u003e\n\u003ctd\u003e2 × knurled M5 compression fittings (PITOT, STATIC) for 6 mm OD \/ 4 mm ID tubing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCAN connectors\u003c\/td\u003e\n\u003ctd\u003e2 × TE DEUTSCH YUAV002-06PN-HE000, 6-way pin receptacles, 2-hole flange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental\u003c\/td\u003e\n\u003ctd\u003eEngineered to DO-160G and MIL-STD-810H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e−10 °C to +55 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing\u003c\/td\u003e\n\u003ctd\u003eGreen anodized aluminum, fully potted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e47.6 × 41.3 × 19.1 mm case; 60.3 mm wide including ears; fittings add 13 mm at the front, connectors 10.3 mm at the rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003e4 × Ø3.4 mm holes, 54.0 × 25.4 mm pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eAD01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eAbout Node\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt like avionics, because that's what we build.\u003c\/strong\u003e Node is an avionics manufacturer holding FAA Parts Manufacturer Approval (PMA), and we've built avionics for general aviation and OEM customers for 35 years. For more than a decade we've also flown large unmanned systems: multicopters, VTOLs, helicopters and fixed-wing aircraft. Every Node Electronics part is made in our FAA-approved manufacturing facility, housed in anodized aluminum and engineered to DO-160G and MIL-STD-810H environmental standards, the same standards certifiable UAS autopilots are built to. It's the hardware the unmanned and optionally piloted industry needs when \"good enough for a hobby build\" isn't.\u003c\/p\u003e","brand":"Node Electronics","offers":[{"title":"Default Title","offer_id":67863786717236,"sku":null,"price":1145.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/3565\/8548\/files\/adNODE_02_rear_right.png?v=1793315909"},{"product_id":"gpsnode-dronecan-gnss-receiver","title":"gpsNODE DroneCAN GNSS Receiver","description":"\u003ch3\u003ePut the receiver where it's safe and the antenna where it sees the sky.\u003c\/h3\u003e\n\u003cp\u003ePuck-style GPS units force the receiver to live wherever the antenna has to go: exposed on a mast, in the weather, in the vibration. The gpsNODE separates the two. The receiver sits in a sealed, potted aluminum housing wherever it's best protected, and your external GNSS antenna connects to the gold SMA port on top. Two sealed CAN connectors put it on the DroneCAN bus.\u003c\/p\u003e\n\u003ch4\u003eKey features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDroneCAN GNSS receiver for ArduPilot and PX4 autopilots\u003c\/li\u003e\n\u003cli\u003eGold-plated SMA (female) antenna port on top for an external active GNSS antenna\u003c\/li\u003e\n\u003cli\u003eTwo sealed TE DEUTSCH UAV-series 6-way circular connectors (CAN 1 \/ CAN 2) for daisy-chaining on the bus\u003c\/li\u003e\n\u003cli\u003eFully potted, sealed, green anodized aluminum housing with four mounting ears; engineered to DO-160G and MIL-STD-810H environmental standards; −10 °C to +55 °C operating\u003c\/li\u003e\n\u003cli\u003eMade in our FAA-approved manufacturing facility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTypical uses:\u003c\/strong\u003e external-antenna GNSS installs · aircraft with skin-mounted or mast-mounted antennas · keeping the receiver out of the weather\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003eDroneCAN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAntenna connector\u003c\/td\u003e\n\u003ctd\u003eSMA female (jack), gold-plated, 50 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCAN connectors\u003c\/td\u003e\n\u003ctd\u003e2 × TE DEUTSCH YUAV002-06PN-HE000, 6-way pin receptacles, 2-hole flange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental\u003c\/td\u003e\n\u003ctd\u003eEngineered to DO-160G and MIL-STD-810H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e−10 °C to +55 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing\u003c\/td\u003e\n\u003ctd\u003eGreen anodized aluminum, fully potted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e47.6 × 41.3 × 19.1 mm case; 60.3 mm wide including ears; SMA adds 8.2 mm on top, connectors 10.3 mm at the rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003e4 × Ø3.4 mm holes, 54.0 × 25.4 mm pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eGP01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eAbout Node\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt like avionics, because that's what we build.\u003c\/strong\u003e Node is an avionics manufacturer holding FAA Parts Manufacturer Approval (PMA), and we've built avionics for general aviation and OEM customers for 35 years. For more than a decade we've also flown large unmanned systems: multicopters, VTOLs, helicopters and fixed-wing aircraft. Every Node Electronics part is made in our FAA-approved manufacturing facility, housed in anodized aluminum and engineered to DO-160G and MIL-STD-810H environmental standards, the same standards certifiable UAS autopilots are built to. It's the hardware the unmanned and optionally piloted industry needs when \"good enough for a hobby build\" isn't.\u003c\/p\u003e","brand":"Node Electronics","offers":[{"title":"Default Title","offer_id":67863786782772,"sku":null,"price":1145.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/3565\/8548\/files\/gpsNODE_02_rear_right.png?v=1793315979"},{"product_id":"pwmnode-dronecan-pwm-output-module","title":"pwmNODE DroneCAN PWM Output Module","description":"\u003ch3\u003eDrive PWM devices from the CAN bus.\u003c\/h3\u003e\n\u003cp\u003eServos, ESCs, lights and payload releases still speak PWM, but your wiring doesn't have to run all the way back to the autopilot. The pwmNODE takes commands over DroneCAN and drives PWM outputs locally, right where the devices are. The outputs come out on the same sealed, jackscrew-locking DB9 used on our PowerNODE, and two sealed CAN connectors on the back put it on the bus. It's our most compact node, in a fully potted aluminum housing.\u003c\/p\u003e\n\u003ch4\u003eKey features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDroneCAN to PWM: command servos, ESCs and other PWM devices over the CAN bus\u003c\/li\u003e\n\u003cli\u003eSealed, flanged DB9 male output connector with 4-40 jackscrew standoffs (same as the PowerNODE)\u003c\/li\u003e\n\u003cli\u003eDroneCAN interface for ArduPilot and PX4 autopilots\u003c\/li\u003e\n\u003cli\u003eTwo sealed TE DEUTSCH UAV-series 6-way circular connectors (CAN 1 \/ CAN 2) for daisy-chaining on the bus\u003c\/li\u003e\n\u003cli\u003eFully potted, sealed, green anodized aluminum housing with four mounting ears; engineered to DO-160G and MIL-STD-810H environmental standards; −10 °C to +55 °C operating\u003c\/li\u003e\n\u003cli\u003eMade in our FAA-approved manufacturing facility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTypical uses:\u003c\/strong\u003e control surfaces and servos far from the autopilot · ESCs on large multicopters and VTOLs · payload releases, lights and other PWM accessories\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003eDroneCAN in, PWM out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePWM output connector\u003c\/td\u003e\n\u003ctd\u003eDB9 male, IP67 flanged, 4-40 jackscrew standoffs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCAN connectors\u003c\/td\u003e\n\u003ctd\u003e2 × TE DEUTSCH YUAV002-06PN-HE000, 6-way pin receptacles, 2-hole flange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental\u003c\/td\u003e\n\u003ctd\u003eEngineered to DO-160G and MIL-STD-810H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e−10 °C to +55 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing\u003c\/td\u003e\n\u003ctd\u003eGreen anodized aluminum, fully potted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e47.6 × 28.9 × 25.4 mm case; 60.3 mm wide including ears; DB9 adds 4.8 mm at the front, connectors 10.3 mm at the rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003e4 × Ø3.4 mm holes, 54.0 × 19.1 mm pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003ePW01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eAbout Node\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt like avionics, because that's what we build.\u003c\/strong\u003e Node is an avionics manufacturer holding FAA Parts Manufacturer Approval (PMA), and we've built avionics for general aviation and OEM customers for 35 years. For more than a decade we've also flown large unmanned systems: multicopters, VTOLs, helicopters and fixed-wing aircraft. Every Node Electronics part is made in our FAA-approved manufacturing facility, housed in anodized aluminum and engineered to DO-160G and MIL-STD-810H environmental standards, the same standards certifiable UAS autopilots are built to. It's the hardware the unmanned and optionally piloted industry needs when \"good enough for a hobby build\" isn't.\u003c\/p\u003e","brand":"Node Electronics","offers":[{"title":"Default Title","offer_id":67863786848308,"sku":null,"price":1145.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/3565\/8548\/files\/pwmNODE_02_rear_right.png?v=1793316208"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/3565\/8548\/collections\/NewNodes_collection.png?v=1793316347","url":"https:\/\/node.aero\/collections\/dronecan-nodes.oembed","provider":"Node Electronics","version":"1.0","type":"link"}