{"product_id":"hubnode-canbus-hub-medium","title":"HubNODE CANbus Hub (Medium)","description":"\u003ch3\u003eRoom to grow, with power on the same harness.\u003c\/h3\u003e\n\u003cp\u003eOnce an aircraft carries ESCs, servos, a payload and redundant sensors on CAN, the bus becomes the backbone of the airframe. The HubNODE Medium handles it two ways. \u003cstrong\u003eSignal Only\u003c\/strong\u003e fans CAN H and CAN L out to 9 nodes. \u003cstrong\u003eSignal + Power\u003c\/strong\u003e carries CAN H, CAN L, power and ground to 4 nodes, so each device gets data and power through one connector and one cable. Both run through a single 19-pin LEMO M-series receptacle on a potted aluminum case.\u003c\/p\u003e\n\u003ch4\u003eKey features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSignal Only: 9-way CAN distribution · Signal + Power: 4-way CAN + power + ground. Each pin group is a plain common bus, so you decide which line runs on which group\u003c\/li\u003e\n\u003cli\u003eOne 19-pin LEMO M-series receptacle: IP68, ratchet locking, 300 g shock and 37.8 g rms random vibration rated\u003c\/li\u003e\n\u003cli\u003eNo active electronics: nothing to power, update or fail\u003c\/li\u003e\n\u003cli\u003eNo built-in termination: terminate the bus at the mating connector, exactly where your architecture needs it\u003c\/li\u003e\n\u003cli\u003eWorks with DroneCAN, Cyphal, CANopen, J1939 and any other CAN protocol\u003c\/li\u003e\n\u003cli\u003ePotted, green anodized aluminum case engineered to DO-160G and MIL-STD-810H environmental standards; −10 °C to +55 °C operating\u003c\/li\u003e\n\u003cli\u003ePairs with a PowerNODE converter to feed a regulated rail to every node\u003c\/li\u003e\n\u003cli\u003eMade in our FAA-approved manufacturing facility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTypical uses:\u003c\/strong\u003e heavy-lift multicopters and VTOLs · CAN ESC and servo networks · powered DroneCAN peripherals (GPS, lights, payload controllers) · redundant sensor buses\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eSignal Only\u003c\/th\u003e\n\u003cth\u003eSignal + Power\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWays\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLines carried\u003c\/td\u003e\n\u003ctd\u003e2 common groups (typically CAN H, CAN L)\u003c\/td\u003e\n\u003ctd\u003e4 common groups (typically CAN H, CAN L, PWR, GND)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContact rating\u003c\/td\u003e\n\u003ctd\u003e4 A per contact\u003c\/td\u003e\n\u003ctd\u003e4 A per contact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin bussing\u003c\/td\u003e\n\u003ctd\u003ePins 1–9 · 10–18 common; 19 not connected\u003c\/td\u003e\n\u003ctd\u003ePins 1–4 · 5–8 · 9–12 · 13–16 common; 17–19 not connected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower-line capacity\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e4 A total per group when fed from one way; feed from two ways for up to 8 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eLEMO HEN.2M.319.XLNP, 19-pin, IP68 · mates with FMN.2M.319.XLC\u003c\/td\u003e\n\u003ctd\u003esame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTermination\u003c\/td\u003e\n\u003ctd\u003eNone built in; terminate at the mating connector\u003c\/td\u003e\n\u003ctd\u003esame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental\u003c\/td\u003e\n\u003ctd\u003eEngineered to DO-160G and MIL-STD-810H\u003c\/td\u003e\n\u003ctd\u003esame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e−10 °C to +55 °C\u003c\/td\u003e\n\u003ctd\u003esame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing\u003c\/td\u003e\n\u003ctd\u003eGreen anodized aluminum, fully potted\u003c\/td\u003e\n\u003ctd\u003esame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e38.1 × 25.7 × 25.4 mm (1.50 × 1.01 × 1.00 in)\u003c\/td\u003e\n\u003ctd\u003esame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e≈20 g (estimated)\u003c\/td\u003e\n\u003ctd\u003e≈20 g (estimated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eCH19\u003c\/td\u003e\n\u003ctd\u003eCH19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eAbout Node\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt like avionics, because that's what we build.\u003c\/strong\u003e Node is an avionics manufacturer holding FAA Parts Manufacturer Approval (PMA), and we've built avionics for general aviation and OEM customers for 35 years. For more than a decade we've also flown large unmanned systems: multicopters, VTOLs, helicopters and fixed-wing aircraft. Every Node Electronics part is made in our FAA-approved manufacturing facility, housed in anodized aluminum, fully potted, and engineered to DO-160G and MIL-STD-810H environmental standards, the same standards certifiable UAS autopilots are built to. It's the hardware the unmanned and optionally piloted industry needs when \"good enough for a hobby build\" isn't.\u003c\/p\u003e","brand":"Node Electronics","offers":[{"title":"Signal Only (CAN High \/ CAN Low) | 9-way splitter","offer_id":67835498463284,"sku":null,"price":499.95,"currency_code":"USD","in_stock":true},{"title":"Signal + Power (CAN High \/ CAN Low \/ Power \/ Ground) | 4-way splitter","offer_id":67835498496052,"sku":null,"price":499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/3565\/8548\/files\/hubNODE_CH19_01.jpg?v=1793043186","url":"https:\/\/node.aero\/products\/hubnode-canbus-hub-medium","provider":"Node Electronics","version":"1.0","type":"link"}