{"product_id":"magnode-dronecan-magnetometer","title":"MagNODE DroneCAN Magnetometer","description":"\u003ch3\u003eA clean heading, wherever you mount it.\u003c\/h3\u003e\n\u003cp\u003eMotors, ESCs and high-current wiring are the enemy of a good compass. The MagNODE puts a PNI RM3100 magneto-inductive magnetometer in a sealed, potted aluminum housing on DroneCAN, so you can mount it where the magnetic field is quiet, out on a boom or a wing, and run a single rugged cable to it. Two CAN connectors let it sit anywhere in a daisy-chained bus, and the X, Y and Z axes are marked right on the label so the orientation is set correctly the first time.\u003c\/p\u003e\n\u003ch4\u003eKey features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePNI RM3100 3-axis magneto-inductive magnetometer: high resolution and low noise\u003c\/li\u003e\n\u003cli\u003eDroneCAN interface for ArduPilot and PX4 autopilots\u003c\/li\u003e\n\u003cli\u003eTwo sealed TE DEUTSCH UAV-series 6-way circular connectors (CAN 1 \/ CAN 2) for daisy-chaining on the bus\u003c\/li\u003e\n\u003cli\u003eSensor axes (X forward, Y right, Z down) marked on the top label\u003c\/li\u003e\n\u003cli\u003eFully potted, sealed, green anodized aluminum housing with four mounting ears; engineered to DO-160G and MIL-STD-810H environmental standards; −10 °C to +55 °C operating\u003c\/li\u003e\n\u003cli\u003eMade in our FAA-approved manufacturing facility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTypical uses:\u003c\/strong\u003e remote compass mounting on booms, masts and wings · moving the compass away from GPS-integrated units with interference · redundant heading sources on larger airframes\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor\u003c\/td\u003e\n\u003ctd\u003ePNI RM3100 3-axis magnetometer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003eDroneCAN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCAN connectors\u003c\/td\u003e\n\u003ctd\u003e2 × TE DEUTSCH YUAV002-06PN-HE000, 6-way pin receptacles, 2-hole flange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxis marking\u003c\/td\u003e\n\u003ctd\u003eX forward (away from connectors), Y right, Z down\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental\u003c\/td\u003e\n\u003ctd\u003eEngineered to DO-160G and MIL-STD-810H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e−10 °C to +55 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing\u003c\/td\u003e\n\u003ctd\u003eGreen anodized aluminum, fully potted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e47.6 × 41.3 × 19.1 mm case; 60.3 mm wide including ears; connectors add 10.3 mm at the rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003e4 × Ø3.4 mm holes, 54.0 × 25.4 mm pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eMN01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eAbout Node\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt like avionics, because that's what we build.\u003c\/strong\u003e Node is an avionics manufacturer holding FAA Parts Manufacturer Approval (PMA), and we've built avionics for general aviation and OEM customers for 35 years. For more than a decade we've also flown large unmanned systems: multicopters, VTOLs, helicopters and fixed-wing aircraft. Every Node Electronics part is made in our FAA-approved manufacturing facility, housed in anodized aluminum and engineered to DO-160G and MIL-STD-810H environmental standards, the same standards certifiable UAS autopilots are built to. It's the hardware the unmanned and optionally piloted industry needs when \"good enough for a hobby build\" isn't.\u003c\/p\u003e","brand":"Node Electronics","offers":[{"title":"Default Title","offer_id":67863786651700,"sku":null,"price":1145.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/3565\/8548\/files\/MagNODE_02_rear_right.png?v=1793315721","url":"https:\/\/node.aero\/products\/magnode-dronecan-magnetometer","provider":"Node Electronics","version":"1.0","type":"link"}